THE SENTRY MESH 6161 IS THE ULTIMATE PERSONAL RADIO THAT DELIVERS PERFORMANCE, RANGE AND VERSATILITY IN A LIGHTWEIGHT AND COMPACT, WEARABLE UNIT THAT MINIMISES USER BURDEN

The Sentry Mesh 6161 is a Software Defined Radio based on our highly robust MANET waveforms that have been proven in applications from Public Safety to Unmanned Systems and Covert Operations. The MeshUltraTM waveform combines efficient use of bandwidth with superior LPI/LPD performance to maximise voice and data communication effectiveness in contested environments.

The standardised design of the 6161 ensures that it can be integrated with a large range of accessory devices such as audio, data, power solutions, and antennas to address current and future program needs.

6161 ISO

SWAP OPTIMISED

The Sentry Mesh 6161 features a compact, light, ergonomic construction which is designed to integrate with soldier systems, including Power and Data distribution systems, minimising cabling complexity and removing the need for a dedicated battery.

SUPPORTED COMMUNICATION MODES

The Sentry Mesh 6161 radio provides high quality simplex and full duplex digital voice and high speed IP data capabilities over a robust, self-forming and self-healing wireless network. Voice communications via single or multiple simultaneous talkgroups is fully supported through preset configuration and the dual PTT capability. Data rates of up to 44.9 Mbps are achievable providing the possibility for a wide range of data applications like sensors and video streaming, greatly enhancing the operational picture.

TOUGH AND FUTURE PROOF

The modular and standards-based design of the Sentry Mesh 6161 radio means that it can be easily integrated with MOTS and COTS equipment such as conformal RF and GPS antennas, power systems, cameras and end user devices, facilitating a huge range of deployment configurations. The 6161 radio is a full MIL spec, waterproof design, ensuring that it can operate reliably in the harshest conditions.

Capabilities

Rugged

Designed, tested and certified to IP68 and comprehensive MIL-STD-810H standards, the Sentry Mesh 6161 is built to last in all conditions.

Lightweight

The Sentry Mesh 6161 sets the standard with a weight of less than 450g, excluding accessories.

Compact

The highly optimised design of the Sentry Mesh 6161 has resulted in an extremely compact and ergonomic form factor.

Ease of Use

With the embedded web-based configuration tool and simplified controls on the Sentry Mesh 6161 radio unit, ease of configuration and use is assured.

Encryption

Security of voice and data communications is assured through the optional FIPS 140-2 certified AES-256 bit encryption, with DES-56 bit encryption also available.

MIMO/MESH

The MeshUltaTM MIMO MESH waveform maximises throughput and optimises spectrum utilisation along with superior performance in the presence of interference.

SITUATIONAL AWARENESS

With its embedded GPS receiver/antenna and direct compatibility with applications such as ATAK (Android Team Awareness Kit), the Sentry Mesh 6161 can support situational awareness capabilities.

Specifications

  • GENERAL
  • RF
  • MECHANICAL & ENVIRONMENTAL
  • Waveforms MeshUltra™ Set of user selectable MESH waveforms (up to 144 nodes, 0.25 to 10 MHz BW)
  • Talkgroups Up to 32 simultaneous per frequency
  • Vocoder CODEC2
  • Network Size Up to 144
  • Data Throughput 44.9 Mbps maximum, dependent upon number of active nodes, settings and channel conditions
  • Supply Characteristics Wide range DC supply input (9 - 17 VDC)
    Power Consumption 6W typical
  • Battery Life Up to 18 Hours typical with UBBL35 Conformal Battery
  • GPS Internal receiver (GPS, GLONASS and Beidou). Antenna internal or external
  • Compliance MIL-STD 461G, Australian RCM, IEC62368
  • Interfaces Headset (2-channel, dual PTT support)
    Power & data - NetWarrior compatible
    RF (TNC x 2)
    External GPS (SMB)
    USB and Ethernet
  • Controls Pre-set Talkgroup / Power / EMCON / Zeroise (multifunction rotary control)
    Volume up/down (pushbutton)
  • Indicators One LED (Power I Network / BITE status)
  • Frequency Bands 1.2 to 1.7 GHz (L Band variant). Other bands available upon request
  • Bandwidth 1.25 MHz, 1.5 MHz, 1.75 MHz, 2.5 MHz, 3 MHz, 3.5 MHz, 5 MHz, 6 MHz, 7 MHz, 8 MHz, and 10 MHz
  • Power Output Programmable, up to 2 x 1W per channel (2W total)
  • Size 114 x 75 x 29mm, excluding connector protrusions
  • Weight 445g, excluding cables
  • Temperature Range Operational: -30 to +55°C typical
    Storage: -50 to +80°C
  • Ingress Protection IP68
  • Military Standards MIL-STD-810H (high temperature, low temperature, shock, vibration, altitude, dust, humidity, salt fog, fungus, contamination by fluids)
  • Environmental Protection RoHS Compliant, RoHS3 (EU 2011/65-EU), REACH
  • MTBF 110,000 hours
  • MTTR Less than 10 minutes

Values noted are typical. Equipment descriptions and specifications subject to change without notice or obligation.

Challenging requirements?
Speak to an expert today to design your solution.