The SOL7 HDIFRX is a digital four-way diversity video receiver and IP video streaming decoder with a rich feature set making it suitable for a wide range of applications.

Designed to operate with DTC downconverters, the SOL7 HDIFRX provides four-way diversity IF inputs to improve the quality and reliability of the RF link.

THE SOL7 HDIFRX can demodulate DVB-T or unique DTC narrowband formats, allowing for a wide selection of demodulation bandwidths. Equipped with low delay, broadcast quality video decoders, the SOL7 HDIFRX supports HD-SDI, ASI, HDMI and Composite video outputs. A stereo pair of audio can be decoded and is output on headphone and line level outputs as well as embedded into the SDI and HDMI video outputs.

One Product for Multiple Scenarios

The HD IF Receiver incorporates multiple operating modes for suitability in a wide range of different use cases, such as city infrastructure, commercial broadcast, downlinks from airborne assets and more.

Support for DVB-T modulation in 6, 7 and 8MHz bandwidth means the HD IF Receiver can accept incoming transmissions from a wide array of industry-standard 3rd party transmitters. Alternatively the HD IF Receiver supports DTC's proprietary Ultra Mobile Video Link waveform for greatly improved performance even in greater range, constrained bandwidth and high-velocity situations.

Four-way Diversity

The HD IF receiver users 4 antenna receive ports to allow maximum-ratio combining for fade and multipath elimination.

Proven Cross-Platform Compatibility

The HD IF receiver is able to accept RF feeds from a wide range of 3rd party manufacturers, with support for DVB-T in 8, 7 and 6MHz bandwidth. The wide IF input range of 250-850MHz allows the HD IF receiver to accept RF inputs of up to 8.9GHz.

IP Infrastructure Ready

Built to allow integration into wider networks, the HD IF receiver includes IP Control via a web-based GUI, SNMP Monitoring, IP Streaming and IP Decoding.

Specifications

  • General
  • Receivers
  • Audio
  • Video
  • Data / Control
  • Electrical and Mechanical
  • IF Frequency Range 250-850MHz
  • Power Input 8-18VDC reverse polarity protected
  • RF Input (with downconverters) 1GHz – 8.9GHz
  • COMSEC ABS 32 bit as standard,
    AES128 encryption (option),
    AES256 encryption (option)
  • RF Interfaces 4x BNC
  • Band 250 – 850MHz IF (used with downconverters)
  • Bandwidth 6 / 7 / 8 MHz DVB-T,
    8 / 7 / 6 / 2.5 / 1.25MHz / .0.625kHz UMVL Narrowband
  • Modulation (mode dependent) BPSK/
    8PSK/
    QPSK/
    16QAM/
    64QAM COFDM
  • Output (line out & headphone out) 3.5mm TRS
  • Line Level Out 0.707V rms
  • Sample Rate 48KHz
  • Headphone Level Out 30mW into 16Ω
  • Format MPEG audio layer 1 or 2
    NICAM
    LPCM
  • Output 2x BNC (HD-SDI & Composite),
    1x HDMI-A
  • Coding Mode H.264 SD or HD
  • HD-SDI Video 720p 50/59/60,
    1080i 50/59/60,
    1080p 23/24/25/29/30,
    1080psf 23/24/25/29/30
  • Composite Video Format PAL/NTSC
  • Delay <43ms over RF link (mode dependent)
  • Ethernet 10/100 Base-T
  • Size 180mmW – 105mmD – 42mmH
  • Weight 940g
  • Temperature Range -10°C to +50°C with cooling

Values noted are typical. Equipment descriptions and specifications subject to change without notice or obligation.

Challenging requirements?
Speak to an expert today to design your solution.